Graham County · North Carolina
Start with a
local contact.
BackCountrySignal created Graham County Mesh. Use this page to prepare a compatible radio and arrange a controlled test with the local team.
Graham County Mesh runs stock LongFast
The local network uses the Meshtastic® defaults: US region, the LONG_FAST modem preset, the default frequency slot and the default primary channel, LongFast, with its default key. A radio set to the US region with no other changes is already on our settings. This page was reviewed November 7, 2026.
Arrange a first testSettings at a glance
- Region: US (902–928 MHz). Use a supported US-band radio and follow the official instructions for your exact hardware.
- Modem preset: LONG_FAST, the factory default.
- Frequency slot: leave it at 0. The radio then uses the default LongFast slot, 906.875 MHz in the US.
- Primary channel: the default LongFast channel with its default key. Do not rename it or change its key, or you will not hear the mesh.
- Firmware: the newest release not marked Alpha (2.7.26 as of November 2026). The 2.8 line is still alpha.
If you changed any of these earlier, set the region to US and the preset back to LONG_FAST, and reset the primary channel to its default.
Keep the default channel public in mind
Everyone with a stock radio can read the default LongFast channel, because its key is published. Treat it like a public radio frequency. Keep exact home coordinates out of it, and set position precision before sharing location. For private conversations, use a direct message or add a secondary channel with your own key, and share that key only with the people who need it.
First radio test
- Start with two nearby nodes. Exchange a short message in each direction and confirm receipt on the other device.
- Agree on node role and location sharing before the test. Most handhelds and home nodes should stay on the CLIENT role.
Official LoRa configuration · Follow the first-contact checklist · Check preset changes in other regions
Before importing a channel QR code
A channel link may contain encryption keys and may change your channel configuration. Save a private record of your settings, confirm the sender and review the import screen in the official client. Only share links for channels intentionally made public. Graham County Mesh does not need a QR code: the default channel is already on every stock radio.
Find nearby communities
Western North Carolina and regional resources · Search the nationwide community directory. Each group maintains its own settings; a listing does not establish radio connectivity to Graham County.