Search BackCountrySignal

    Open full search pageSearches run in your browser. Nothing you type is sent anywhere.

    Start here · first transmission

    Get started.

    You do not need a complicated station to begin experimenting with Meshtastic®. Start small, learn your gear, then help make the network better.

    The mission

    Get to your first
    two-way message.

    Follow a five-step checklist, confirm local settings and test with a nearby operator. Save your progress as you go.

    1. WP 01CHOOSE

      Choose a node

      Look for a Meshtastic®-compatible LoRa device with the appropriate regional configuration for the United States. A small handheld is enough to start.

      Compare hardware
    2. WP 02INSTALL

      Install Meshtastic®

      Use the official Meshtastic® documentation to install firmware, configure your region, set a useful node name, and learn the controls before heading into the field.

      Official docs ↗
    3. WP 03CLIMB

      Find the high ground

      Test from your home, vehicle, trailhead, and ridgelines. Graham County's steep elevation changes mean coverage can change dramatically over a short distance.

      Plan a path
    4. WP 04SHARE

      Join the local effort

      Share useful observations: where you can hear nodes, where messages fail, what antenna you used, and what elevation or terrain was involved.

      Share a report

    Join the Graham County mesh

    From first power-up
    to first contact.

    Confirm the current local settings before transmitting. Start near a window or outdoors, then test with another operator rather than assuming a map marker guarantees contact.

    1. 01Choose hardware
    2. 02Install firmware for your exact device
    3. 03Walk through setup
    4. 04Record your first test

    Quick answers

    Before you
    transmit.

    Read the beginner FAQ

    New to mesh?

    Your phone is the screen and keyboard; a paired node sends short messages to other compatible nodes. Nearby nodes can relay messages farther. Hills, buildings, antenna placement, and matching settings determine whether a message gets through.

    Not hearing anyone?

    Check power, antenna connection, Bluetooth pairing, region, and local node settings. Arrange a short test with a second node nearby, then change one thing at a time and record the result.

    Guided troubleshooting →

    Field note

    Your first node is a
    sensor for the network.

    Every successful contact teaches us something about terrain, placement, and coverage in Graham County.