Search BackCountrySignal

    Open full search pageSearches run in your browser. Nothing you type is sent anywhere.

    Meshtastic® · Off-grid · Western North Carolina

    Signal where
    the towers quit.

    Learn LoRa mesh, plan a link against real terrain, build a node that survives a mountain winter, and find the people already on the air, from Graham County to your own community.

    906.875 MHz · LONGFAST · SLOT 20

    Live · public MQTT · last 8h

    Within 25 mi
    —
    Within 100 mi
    —
    Worldwide
    —

    Distances from Robbinsville. Radios that don't report over MQTT never show up, so local counts run low. Help fill the map

    The route in

    From first radio
    to ridgetop relay.

    Four waypoints. Each one ends with something you can actually do this weekend.

    1. WP 01LEARN

      Academy

      Short lessons on LoRa, presets, channels and hops, with knowledge checks along the way.

      Start the lessons
    2. WP 02PLAN

      Link planner

      Check a path against real terrain and Fresnel clearance before you carry a node uphill.

      Plan a link
    3. WP 03BUILD

      Starter builds

      Pick a handheld, solar router or Pi node, then set it up with the config wizard.

      Choose a build
    4. WP 04TEST

      Field reports

      Log what you heard and what failed. Reviewed reports become the local coverage record.

      Share a report

    RF Explorer

    See the ridge
    before you climb it.

    Drop two points, set antenna heights, and get a terrain profile with line of sight and Fresnel clearance from USGS elevation data. Then save it to your offline field pack.

    • 01Real terrain, not a radius circle
    • 02First Fresnel zone clearance along the whole path
    • 03Opens offline once saved to your phone
    EXAMPLE PROFILE · SITE A → SITE B906.875 MHz
    LINE OF SIGHT● CLEAR
    CLOSEST POINTMID-PATH
    FRESNEL F1CHECKED

    Maps

    Your county.
    Your state.

    Public observations are labeled as observations. Reviewed coverage is labeled as reviewed. You always know what you are looking at.

    Graham County Mesh settingsStock defaults: a new radio set to US is already on the mesh

    Region
    US
    Preset
    LONG_FAST
    Slot
    20 906.875 MHz
    Channel
    LongFast default key
    Full setup

    Public Meshtastic® observations around Graham County, from MeshMap.

    Graham County meshPUBLIC MQTT · NOT GUARANTEED COVERAGE
    Full map

    Statewide · NC Mesh

    North Carolina, node by node.

    See the statewide map maintained by NC Mesh, a community building grid- and solar-powered Meshtastic® infrastructure across the state.

    Open the NC Mesh map Plan your next link

    From the mesh

    Mesh news.

    Browse all mesh news →
    SoftwareSource summary

    Published

    Apple app 2.7.27 and 2.7.28 label offline maps and fix Watch and widget bugs

    Two Meshtastic releases for iPhone, iPad and Mac landed on November 2 and November 10. With no network, the downloaded offline map now shows place names and, in 2.7.28, street and landmark names. The releases fix an app hang when sending nodes to an Apple Watch, a widget crash and an all-black Live Activity card. A new Device Screen view can mirror and press the connected radio's buttons, but the firmware side is still an open pull request, so current firmware does not support it.

    SoftwareSource summary

    Published

    Android 2.8.4 adds a connection tile, live notifications and a node tracker widget

    The 2.8.4 release of the Meshtastic Android app adds a Quick Settings tile for the radio connection, Live Update notifications for mesh status or a tracked node, and a Node Tracker home-screen widget. Nodes can be given local display names, traceroutes that other nodes ran to you appear on your own node, and nodes stacked at one spot on the map show as a single counted chip. The release notes also list settings, firmware, MQTT and admin fixes, plus recovery for a corrupt device database.

    FirmwareSource summary

    Published

    2.8.2 alpha changes packet signing and is re-released for a telemetry crash

    The project revoked its first 2.8.2 build and re-released it two days later to fix a stack exhaustion bug in environmental telemetry. The release changes the packet-signing policy: in Compatible mode nodes no longer sign packets, and Strict mode gains exemptions. It also refuses key verification when licensed (ham) mode is on, lets MQTT gateways uplink encrypted direct messages they relay but cannot read, and lists Listen Before Talk and receive-path improvements. Like 2.8.1, it is marked alpha and pre-release; 2.7.26 is still the newest non-alpha build.

    Firmware watch

    What's running,
    what's coming.

    Current Meshtastic® firmware channels and the work in the pipeline, checked against the release tags. Snapshot .

    Live check: waiting for the official firmware list…

    Firmware Center →Development Radar →Release alerts (RSS)

    Field pack

    Works when you are
    out of signal, too.

    Save your project, link plans, configs and checklists to your phone, and they open on the ridge with zero bars.

    Graham County Mesh

    Meet, test, build.

    No public meetup is confirmed yet. Arrange a nearby radio test or ask about a build session with the local team.

    Get new events automatically: subscribe in Apple Calendar or Outlook · subscribe in Google Calendar · feed: https://backcountrysignal.org/events.ics

    Graham County Mesh

    Got a ridge, a barn roof
    or a fire tower?

    One well-placed solar node can link a whole valley. Offer a site, or find a group near you to test with.